Ship Forum :  Warsailors.com Warsailors.com
 
Norwegian Merchant Fleet WW II | 100 Most Recent Ship Forum Postings | Forum Tips
 
Re: Philippine 'Coast Guard' ships
Posted by: Ralph (IP Logged)
Date: August 10, 2008 12:01PM

Dave and Andreas

Thank you for the wonderful information! I do not have my American Register with me so I cannot check on status of these ships in the late 30's early 40's. Any additional information, particularly regards to late names and fates, would be most welcome. Do you have yard numbers for any of them?

Related, do you have any information on other Phil Govt ships? according to that web site, a launch "Ranger" and a cable ship "Rizal" were also built. I have "Rizal" as built 1930 by Hong Kong & Whampoa for Nav. Filipina - is this the same ship?

I have a list of ships built by Uraga, also unfortunately not with me right now, but I have 3 interesting ships of the right tonnage finished in 1904 for the Japanese Army: "Senkai #1", "Senkai #2", and "Senkai #3" Could these be the 3 originally ordered by the US for the Phil Govt Coast Guard? I assume that construction was underway at Uraga when they were rejected by the US? I have yard numbers 16, 17, and 18 for these three.

thanks for your help!

Ralph



Subject Written By Posted
  Philippine 'Coast Guard' ships Ralph 08/09/2008 01:58PM
  Re: Philippine 'Coast Guard' ships airintel 08/09/2008 07:24PM
  Re: Philippine 'Coast Guard' ships Andreas von Mach 08/10/2008 01:44AM
  Re: Philippine 'Coast Guard' ships airintel 08/10/2008 08:31AM
  Re: Philippine 'Coast Guard' ships Ralph 08/10/2008 12:01PM
  Re: Philippine 'Coast Guard' ships airintel 08/10/2008 02:30PM
  Re: Philippine 'Coast Guard' ships airintel 08/10/2008 02:35PM
  Re: Philippine 'Coast Guard' ships Andreas von Mach 08/10/2008 04:02PM
  Re: Philippine 'Coast Guard' ships Ralph 08/10/2008 06:54PM
  Re: Philippine 'Coast Guard' ships Andreas von Mach 08/11/2008 12:33AM
  Re: Philippine 'Coast Guard' ships paulh 08/12/2008 04:52PM
  Re: Philippine 'Coast Guard' ships Andreas von Mach 11/06/2018 10:26AM


Sorry, only registered users may post in this forum.
This forum powered by Phorum.